Articles on: X-DRAW

How to edit a Configurable Devices in X-DRAW?

Overview:


The Configurable Device feature allows users to configure devices in the BOM by adding compatible cards and their port information. The configured device and its card/port details can then be synced to the X-DRAW Editor for accurate representation in the drawing.


You can add a configurable device to your Bill of Materials (BOM), and it will appear on your drawing along with the port information.


  • On the BOM page, click on the Configure button next to the name of the item you want to configure.



  • This will open a configuration modal where you can add cards to your device by clicking on the Card



  • Click on the ADD button from the drop-down menu to add a card to your device as per your requirement. The drop-down menu displays all compatible cards for the device from their respective brands from both libraries (XTEN-AV and Your My Library)




  • If you are unable to find a suitable card in the XTEN-AV library, you can create a custom card by clicking on the Create Card button.




This will lead you to a page where you need to fill in the required fields.


  • To add port information to your card, click on the add port details section and then click on add product button.



  • After adding the cards, all the added cards will appear on the Configuration modal. Click on the Save button.



  • Open your X-DRAW Editor and click on the Pull BOM changes button.



  • On the X-DRAW editor page, a block will be created with the name of the device, and all the card port information will appear under the block.



Note: Every configurable device added from the XTEN-AV library has a card limit. If you need to add more cards, you can create a custom configurable device by following the steps mentioned in the given link: https://knowledgebase.xtenav.com/en-us/article/how-to-add-a-custom-configurable-device-in-x-draw-g0dbbb/



Updated on: 11/09/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!