> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://knowledgebase.xtenav.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Why am I not seeing expected results in my drawings or BOM?

If you are unable to see the changes in the drawing or BOM, you may need to sync the components between the drawing and BOM.

Please follow the steps below:

• To sync the BOM with the drawing (or vice versa), kindly refer to the following article: [How to Sync Your Drawing with Your BOM](https://knowledgebase.xtenav.com/en-us/article/how-to-sync-your-drawing-with-your-bom-7r5b57/?utm_source=chatgpt.com)

• Kindly remove and re-add the title block to view the updated changes: [How to Add Title Block to Drawing](https://knowledgebase.xtenav.com/en-us/article/how-to-add-title-block-to-drawing-1dr6793/?utm_source=chatgpt.com)

• Kindly remove and re-add the border to view the updated changes: [How to Add Border to My Drawings](https://knowledgebase.xtenav.com/en-us/article/how-to-add-border-to-my-drawings-1q3thdp/?utm_source=chatgpt.com)

• Click on the Pull Cable Settings option to sync the drawing with the latest cable setting changes. Please refer to the following article: [How to Edit/Apply Cable Signal Settings](https://knowledgebase.xtenav.com/en-us/article/how-to-editapply-cable-signal-settings-33n0vs/?utm_source=chatgpt.com)

If you still face the issue, kindly connect with Xtenav Support with the necessary details. You can contact us through chat support or email us at [support@xtenav.com](mailto:support@xtenav.com).