> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://knowledgebase.xtenav.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to Apply Default Connection Start and End Points to X-DRAW Drawings?

**Overview**:

The **Connection Start and End Points** settings allow you to customize how the beginning and ending points of cable connections are displayed in your drawings. You can set your preferred marker style as the default, helping you maintain a consistent look across your cable connections and making the drawing easier to read and understand.

* Click the **Profile icon** in the top-right corner of the application, then select **Settings** from the menu.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/james-setting_7fxswg.png)

* On the Settings page, click **X-DRAW Settings** in the left sidebar to expand the drop-down menu, then select **Cable & Signal Settings**.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/cable-and-signal-from-james_1o6ogds.png)

* Under **Cable Settings**, locate the **General Settings** section, where you will find the **Connection Points** options.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_dfhzp2.png)

Under **Connection Points**, you can define the default marker style shown at each start and end of a cable connection line:

* **Start** – Use the drop-down to choose the style applied to the **starting point** of the cable.
* **End** – Use the drop-down to choose the style applied to the **ending point** of the cable.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_1045vc3.png)

* Once you have configured the Connection Points (Start/End) settings, click the **Save** button in the top-right corner of the page to apply your changes as the new default.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_1wzugv7.png)

* To see the changes open your drawing in the **X-DRAW Editor**. Click on **X-DRAW Settings** on the top menu bar. Under the **Cable Settings** section, select **Pull Cable Settings**.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_j20g7c.png)

* After updating the **Pull Cable Settings**, click **Apply Cable Style** to apply the latest style settings. This ensures that the cable styles are updated correctly according to the new configuration.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_ong3ip.png)

* After applying the cable settings, the **Connection Start** and **End Points** will appear according to your selected settings.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_1gps5wg.png)

**Related Articles:**

* [How to edit/apply Cable & Signal Settings?](https://knowledgebase.xtenav.com/en-us/article/how-to-editapply-cable-signal-settings-33n0vs/)
* [How to assign Cable ID?](https://knowledgebase.xtenav.com/en-us/article/how-to-assign-cable-id-4c7o9i/)
* [Can I remove Cable ID from the drawing?](https://knowledgebase.xtenav.com/en-us/article/can-i-remove-cable-id-from-the-drawing-1mc95l/)