> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://knowledgebase.xtenav.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to Add / Delete a product from BOM?

* To delete a product, go to the **Search & Add Products** page. You may delete a single product by selecting it and clicking the **X** icon.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_h7f2vi.png)

* A confirmation pop-up will inform you that Are you sure? It will delete the product from the line schematics, Click **Continue** to proceed.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_hh1vg.png)

* To delete **multiple products**, navigate to the **Search & Add Products** page and select the checkbox on the left-hand side of each product you want to remove. 

* After selecting the products, click on the **Delete** option.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_171nfhk.png)

* A confirmation message will appear stating, “**Are you sure? It will delete all your selected products from the line schematics too**”. Click **Continue** to confirm and complete the deletion.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_1wbmcpf.png)

### How to Add product to BOM?

You can add products to the Bill of Materials (BOM) using either of the following methods:

**Method 1: Edit BOM Page**


* Open the project, hover over **Design**, and click **Edit BOM**.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_l95ezz.png)

* You will be redirected to the **Search & Add Products** page. Use the search bar to find the required product and click on it to add it to the BOM.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_pc61v7.png)

Once you click on the product, the product will immediately reflect in the BOM list.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_ydusl.png)

**Method 2: Refresh BOM Page**

* Open the design in the **X-Draw editor** and add products using the **Product Block feature** from the left navigation panel. Save the design by clicking **“Unsaved changes. Click here to save.”**

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_8cfkbh.png)

* Next, navigate to **Search & Add Products**, click the **three-dot menu** in the top-right corner, and select **Refresh**. This will sync the Drawing with the BOM, and all newly added products will appear in the BOM page.

![](https://storage.crisp.chat/users/helpdesk/website/-/e/3/c/d/e3cdae6433963000/image_5q0e5t.png)
### Related Article

* [How to add a product to My Library?](https://knowledgebase.xtenav.com/en-us/article/how-to-add-a-product-to-my-library-1nyuppk/)
* [How to add product blocks to a drawing?](https://knowledgebase.xtenav.com/en-us/article/how-to-add-product-blocks-to-a-drawing-1en6b2o/)
* [How to add products in a room?](https://knowledgebase.xtenav.com/en-us/article/how-to-add-products-in-a-room-9rspgx/)
* [How can I add port information to my product block in the design?](https://knowledgebase.xtenav.com/en-us/article/how-can-i-add-port-information-to-my-product-block-in-the-design-1op1h8v/)